Preview: HDMI-Extender/Splitter-Set, 1x4-Port, 70 m, 4K/60 Hz,HDR, IR, POC

HDMI-Extender/Splitter-Set, 1x4-Port, 70 m, 4K/60 Hz,HDR, IR, POC

HDMI extender/splitter set over IP, 70 m, 1x4-Port,4K/60 Hz,HDR,IR,POC

Part No.: HD0031

EAN: 4052792050790

PU: 5

Based on Ethernet technology and extends the maximum distance of HDMI cable over a single Cat.5e/6/7/8 cable
Supports lossless uncompressed Ultra HD A/V signal transmission up to 70 m/229 ft
Bandwidth: 6 Gbit/s at 600 MHz per channel (18 Gbit/s total)
Supports up to UHD 4K/60 Hz with YUY 4:4:4 and Full 3D
Power adapter: DC 12 V/2 A
Supports DDC as well as EDID and HDCP 2.2 bypass
Supports HDR10, HLG and High Dynamic Range (HDR) signal
Supports Deep Color (12 bit per channel – 36 bit all channels)
Support of uncompressed audio such as LPCM and compressed audio such as DTS, Dolby Digital
Supports Power over Cable (PoC, 12 V) from transmitter to receiver and IR
Metal cassis, mountable
Plug-and-play – no driver installation needed

General product data:

Weight: 1.19 kg
Height: 11.6 cm
Width: 45.3 cm
Length: 58 cm

The LogiLink Ultra HD HDMI extender/splitter set (transmitter & 4x receiver units) provides an... more

Close menu

Product information "HDMI extender/splitter set over IP, 70 m, 1x4-Port,4K/60 Hz,HDR,IR,POC" from LogiLink

The LogiLink Ultra HD HDMI extender/splitter set (transmitter & 4x receiver units) provides an extender solution over TCP/IP for the very highest demands and distributes audio and video signals from your HDMI device to up to four monitors, TVs or projectors. It transmits digital video and audio signals to a maximum length of up to 70 m over a single Cat.5e/6/7/8 network cable. The highest supported video resolution is 4K/60 Hz. With support for HDCP 1.4/2.2 (bypass function), HDR10, 3D, as well as audio transmission in LPCM 7.1, DTS, Dolby Digital, DTS-HD Master Audio and Dolby TrueHD experience ultra-sharp image quality. The bidirectional infrared interface (transmitter, receiver) allows you to use the remote control of the connected input source. The power supply of the transmitter unit is via the network cable PoC (Power over Cable functionality).

Downloads more

Available downloads: